Splitcoaststampers.com - the world's #1 papercrafting community
You're currently viewing Splitcoaststampers as a GUEST. We pride ourselves on being great hosts, but guests have limited access to some of our incredible artwork, our lively forums and other super cool features of the site! You can join our incredible papercrafting community at NO COST. So what are you waiting for?
I'm a no cushion gal. I don't have a problem getting ink on my acrylic block because I only use spot size ink pads (more control). I find it easier to ink up even the large background stamps with my spots rather than the large inkpads.
Subscribing with a question. For you *no-cushion* gals, do you ever have trouble with ink getting on your block and, consequently, marring the image? I have this even with the thicker cushion (and, of course, it never happens until the LAST image on a complicated card or on a sheet of cardstock that I only have one of!)
Place the stamp, die up, on a flat counter, then pat (gently...it's not a snake ready to attack your babies!) the pad on the die; the coat of ink should be thin and even. Hold the pad as flat as possible to eliminate hitting the block. Since the die is up, you'll know instantly if the die is evenly inked and/or if there's ink on the block.
OR
Ink a hard rubber brayer on an ink pad (thin, even coat of ink on the brayer), then brayer the ink on the die. This is also the way to ink highly detailed stamps and/or oversized ones.
With this system [no foam] do you stamp onto a hard service or use a cushion of some sort?
Some of my stamps have no foam. I have one of those quilters' cutting mats on my table.
BTW... I had no idea this thread would get so many varied responses. In my OP I merely meant to let people know that they could save the Stampin' Up cushion.
OK, stupid question here - will *any* vinyl do or is "vinyl cling" special in some way?
Vinyl comes in different thicknesses...biggest difference in 'cling vinyl' is the polymers in the vinyl. Those polymers make the vinyl 'cling.' Clean, smooth surfaces are a must for cling vinyl to do its job. Over time the polymers will dimish, and the vinyl won't cling as well as it did originally. Usually wiping off the vinyl with a slightly dampened cloth will help (extend) the cling factor.
With this system do you stamp onto a hard service or use a cushion of some sort?
Depends...paper, stamp and ink are the determing factors. I also have a quilter's cutting mat on my work surface, but I've used a couple of sheets of paper, a piece of mat board, craft foam (2, 3, 0r 6mm), or a mouse pad on top of the cutting mat.
I'm a hopeless pre-testor...before I begin, the stamp/ink/surface combo is tested to see what produces the best results. About 75% of the time, a sheet of 3mm Foamies (craft foam) does the job.
I'm a belly-up inker, and also use spot-size pads exclusively -- lots more control over the inking that way! You can also see if you've inked the block, and remove the ink with a swab or your finger. I've found that rocking the stamp causes the inky-edges problem, anyway -- with no cushion rocking is less of an issue, at least for me. HTH! :mrgreen:
Quote:
Originally Posted by MichelleGoodrich
For you *no-cushion* gals, do you ever have trouble with ink getting on your block and, consequently, marring the image?
Subscribing with a question. For you *no-cushion* gals, do you ever have trouble with ink getting on your block and, consequently, marring the image? I have this even with the thicker cushion (and, of course, it never happens until the LAST image on a complicated card or on a sheet of cardstock that I only have one of!)
Michelle,
Important tip I forgot in my earlier post: regardless of how you ink the stamp, stand when inking and stamping. It's amazing how much easier it is to get excellent results if you stand....especially when either stamping on slick surfaces or when using larger stamps.
Another tip when using NO cushion is to use acrylic blocks that "fit" the size of the stamp. Or when using a teensy little stamp, place it very close to a corner of the block. Then the stamp is sort of sticking out, away from your hand instead of underneath it.
Location: in a constant state of disorganization...
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Avatar
Garnet
I see you have a Bless This Chick avatar. Can you tell me how you upload the avatar so it shows when you post a thread?? I can't seem to figure it out. Any help would be appreciated!
Garnet
I see you have a Bless This Chick avatar. Can you tell me how you upload the avatar so it shows when you post a thread?? I can't seem to figure it out. Any help would be appreciated!
Who sells ATIO&O? I checked our local Michael's and AC Moore and didn't find it. I've been using reg EZ mount and didn't know about this option, so I can't wait to try it!
Does any tacky glue work? I have Aileens Quick Dry Tacky glue.
Who sells ATIO&O? I checked our local Michael's and AC Moore and didn't find it. I've been using reg EZ mount and didn't know about this option, so I can't wait to try it!
Does any tacky glue work? I have Aileens Quick Dry Tacky glue.
Thanks!
Tacky Glue is not the same...TIO&O is a repositionable glue. When dry (it'll be clear), it is still sticky (tacky). It's the type of glue on Scotch Post-its.
Tacky glue is an ultra-thick white glue (a PVA).
There are several resitionable glues. Some are in markers and referred to as
'2 in 1 glue.' All work the same way...after application they are allowed to dry til clear and tacky. A permanent bond is formed if the surfaces are adhered before the glue has dried.
It's important to apply TIO&O in a thin coat. If applied in too thick a coat, the glue will lift from the back of the stamp.
One question, does the TIO&O peel off, or do I need to do something to get it off after a few uses when I need to reapply more? Does that make sense?
Will lyers and layers build up on my stamps? Or does it wipe off nicely?
I haven't had any of mine lose stick and need reapplying yet - it lasts a surprisingly long time.
But it doesn't come off all that easily It seems the best way to get it off there is rubbing - with your thumb, or a nice pink eraser so you don't get blisters. I have some stamps that I bought used and the original owner glopped the TIO&O on - just squirted it out of the bottle and didn't mush it around at all (I'm surprised the stamps don't stamp unevenly, actually) - and as god is my witness, I have not been able to get it off so I can put on new. I haven't resorted to the un-du or goo gone yet; I'm hoping that will do the trick. And those, with the thick bead of glue, don't seem to stick nearly as well as the ones with a thin coat.
One question, does the TIO&O peel off, or do I need to do something to get it off after a few uses when I need to reapply more? Does that make sense?
Will lyers and layers build up on my stamps? Or does it wipe off nicely?
One coat will last for ages; you don't reapply each time the stamp is used. When it gets mucky (cat hairs, dust bunnies, glitter, EP) rinse it under running water, place the stampn on a counter, TIO&O side up, and allow it to dry. The stick will be back. Repo glues are not water-reversible. You need a solvent (acetone, laquer thinner, etc.) to completely remove it.
I use WackyTac...in the dabber container. I lightly dab one or two spots on the back of a stamp and allow it to dry (usually about 15 minutes). TIO&O takes a couple of hours (at least) to dry. Drying time of anything depends upon humidity and heat.
A lot of people don't fiddle with the repo glue...one or two strips of Scotch Poster Tape on a block does the job. Slap the stamp on the tape, and pull them off when you're done. The tape stays on the block. When the tape gets mucky, rinse under cool water or replace.
Should we dilute with water? or just apply a thin coat?
I've done it both ways I think it's easier to apply a nice thin coat and it dries faster if you dilute it half and half with water, but that's just my opinion.
...... rinse it under running water, place the stampn on a counter, TIO&O side up, and allow it to dry. The stick will be back. Repo glues are not water-reversible. You need a solvent (acetone, laquer thinner, etc.) to completely remove it.
I find that the TIO&O is somewhat water soluble. I usually apply more after washing the stamp.
Quote:
Originally Posted by craftdesigns
I use WackyTac...in the dabber container. I lightly dab one or two spots on the back of a stamp and allow it to dry (usually about 15 minutes). ........
I might look for WackyTac. Thanks for the tip.
Quote:
Originally Posted by craftdesigns
A lot of people don't fiddle with the repo glue...one or two strips of Scotch Poster Tape on a block does the job.
That's what I've been doing a lot. I'm sort of impulsive. The slap-and-go style suits my personality.
I find that the TIO&O is somewhat water soluble. I usually apply more after washing the stamp.
I might look for WackyTac. Thanks for the tip.
That's what I've been doing a lot. I'm sort of impulsive. The slap-and-go style suits my personality.
I like having the adhesive on the back of the stamp...easier to clean a stamp when it's stuck on a surface...I have a 'scrubbing board.' Covered a sheet of 6mm Foamies (a craft foam) with laminate..the stamps stick to the laminate for cleaning and drying. The laminate is easily wiped clean fafter scrubbing the stamps (battery toothbtush and Kiss Off for the super dirty ones).
I've never diluted TIO&O...thin coat right out of the bottle. I switched to WacyTac cause it's so easily applied with the dabber...a couple dabs will do ya!
Location: East of the Rockys and West of the Rest Canada!
Posts: 3,368
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by MichelleGoodrich
Subscribing with a question. For you *no-cushion* gals, do you ever have trouble with ink getting on your block and, consequently, marring the image? I have this even with the thicker cushion (and, of course, it never happens until the LAST image on a complicated card or on a sheet of cardstock that I only have one of!)
This is exactly why I have to put cushion under my stamps. I guess I am a very messy stamper. Some of my ink pads have quite a 'wow' in the middle, and without the foam they don't reach properly into the ink.
This is exactly why I have to put cushion under my stamps. I guess I am a very messy stamper. Some of my ink pads have quite a 'wow' in the middle, and without the foam they don't reach properly into the ink.
Maybe my problem is more with my ink pads.
Suggestions anyone?
Place the stamp, die up, on the counter; gently pat the stamp on the die.
However, if your pads are permanently dented in the middle, might be time to get some new pads. And...don't pound the stamps into the pad, or the pad on the stamps. Use a light touch when inking; a thin, even coat of ink produces a clear image.
Thanks for all the great info, Nancy! I didn't know that the stickiness can be 'refreshed' by rinsing. (Fuzzies? Moi?!? ;) ) I finally found some of the spritz-on TIO&O and am very pleased with it so far. I spritz it on and then spread it out evenly with a faux credit card, and it takes a couple of hours to dry fully.
I'm loving the idea of the 15-minute drying time, though -- where do you find this dab-on Wacky Tac? I have a package of the WT Super Dots that I found at Jo-Ann's, but haven't seen a liquid. I'm curious now -- will have to try a couple of the Super Dots on the back of some naked rubber to see if they will work.....
I primarily rely on the rubber dies being sticky because of the nature of my storage system -- but do use double-stick tape on my long narrow blocks and keep my long border stamps adhesive-free. I cut a plastic page-protector into strips to cover the tape on the long blocks, and so far they're staying pretty fuzz-free on my desk! :mrgreen:
Quote:
Originally Posted by craftdesigns
One coat will last for ages; you don't reapply each time the stamp is used. When it gets mucky (cat hairs, dust bunnies, glitter, EP) rinse it under running water, place the stampn on a counter, TIO&O side up, and allow it to dry. The stick will be back. Repo glues are not water-reversible. You need a solvent (acetone, laquer thinner, etc.) to completely remove it.
I use WackyTac...in the dabber container. I lightly dab one or two spots on the back of a stamp and allow it to dry (usually about 15 minutes). TIO&O takes a couple of hours (at least) to dry. Drying time of anything depends upon humidity and heat.
It sounds like an ink-pad issue to me, Robin. You could try adding ink to the center of the pad where the dent is, in case it's a lack-of-ink issue in the middle. I think most people tend to try to place the stamp in the middle of a large pad for some reason -- I know I did. Another reason that I love the spots -- they are small enough that uneven use of the surface isn't an issue! :mrgreen:
Quote:
Originally Posted by laderme
This is exactly why I have to put cushion under my stamps. I guess I am a very messy stamper. Some of my ink pads have quite a 'wow' in the middle, and without the foam they don't reach properly into the ink.
Still having trouble finding ATIO&O - I've tried our local Walmart, Joanns, Michaels, AC Moore and some tiny hobby shops. Joanns.com has it but I hate paying $6.95 shipping for a $3 bottle. Does anyone know of a great online stamp store that carries it? I'd love the excuse to buy more stamps to justify the shipping! ;)
Still having trouble finding ATIO&O - I've tried our local Walmart, Joanns, Michaels, AC Moore and some tiny hobby shops. ...........
I have one more suggestion. Phone Joann's and ask if they have this glue in the fabric department. It was originally made for putting on the back of insignias and other decorative patches, so that you could wear them on a sweater and remove them before you put them in the wash.
Also... I have not found Aleene's Tack It Over & Over in the rubber stamp section of any store. At the Joann's here, it usually in a craft area that just has lots of glue choices.
Originally Posted by GarnetJ;786522 I have not found Aleene's Tack It Over & Over in the rubber stamp section of any store. At the Joann's here, it usually in a [U
craft area[/U] that just has lots of glue choices.
Ditto for my local Michael's - the TIO&O is in the glue section back by the blank wood items. They've got more different kinds of glue than I ever knew existed - I think that's where the Mod Podge is hidden too. Look down on the low shelves.
Thanks for all the great info, Nancy! I didn't know that the stickiness can be 'refreshed' by rinsing. (Fuzzies? Moi?!? ;) ) I finally found some of the spritz-on TIO&O and am very pleased with it so far. I spritz it on and then spread it out evenly with a faux credit card, and it takes a couple of hours to dry fully.
I'm loving the idea of the 15-minute drying time, though -- where do you find this dab-on Wacky Tac? I have a package of the WT Super Dots that I found at Jo-Ann's, but haven't seen a liquid. I'm curious now -- will have to try a couple of the Super Dots on the back of some naked rubber to see if they will work.....
I primarily rely on the rubber dies being sticky because of the nature of my storage system -- but do use double-stick tape on my long narrow blocks and keep my long border stamps adhesive-free. I cut a plastic page-protector into strips to cover the tape on the long blocks, and so far they're staying pretty fuzz-free on my desk! :mrgreen:
I can't remember where I got the dab-on WackyTac...think it was on-line. Maybe a Google will bring it up...? It's called WackyTac Liquid Sticky Note Adhesive; the bottle has 1oz.
I tried the WackyTac Super Dots on the back of the stamps...they don't
stay. Didn't try putting them on the blocks, that might work.
Ditto for my local Michael's - the TIO&O is in the glue section back by the blank wood items. They've got more different kinds of glue than I ever knew existed - I think that's where the Mod Podge is hidden too. Look down on the low shelves.
I wrote a book on glues and adhesives (The Complete Guide to Glues & Adhesives)...Michaels doens't have a fraction of the stickies that are out there! I lost track of how many I mentioned in the book; too many to count!
The Wacky Tac adhesive in the dauber bottle is available with a plastic "spreader" and an acrylic block/handle for about $11 at AC Moore in the stamping section rather than the adhesives. I found the Aleene's at my local fabric store....
__________________ My Avatar = Me at Providence Regionals, pointing at my swap on the display board, submitted at Convention 2006!
Sorry, I'm new to this thread. The way I understand the posts is...
If I'm going to convert my SU! wood blocks to acrylic - because they don't stay "sticky" - then I need an adhesive. From what I'm reading, it looks like several have recommended Wacky Tac or Aleen's Tack It Over & Over.
.......If I'm going to convert my SU! wood blocks to acrylic - because they don't stay "sticky" - then I need an adhesive. From what I'm reading, it looks like several have recommended Wacky Tac or Aleen's Tack It Over & Over.
Is that correct?
There are really several options.
If you are converting SU! stamps, you can...
1a. Remove the wood and add Vinyl Cling
1b. Remove the wood and dip the really sticky stuff in Baby Powder so it is no longer permanent. Then use double stick tape on the acrylic block.
2a. Remove both the wood and the cushion and add EZ Mount
2b. Remove both the wood and the cushion and add either the Wacky Tac or Aleen's TIOO directly to the rubber.
2c. Remove both the wood and the cushion and use double stick tape on the acrylic block.
The EZ Mount and the [U]Vinyl[Cling/U] are meant to "cling" to the acrylic block the way that kids window decorations cling. If they should lose their cling over time then either the Wacky Tac or Aleen's TIOO or double stick tape will work.
WackyTac... Hmmmm
